Aluminum aluminum wire
Er4047is widely used in general welding material with the magnesium of 5% and a little of titanium fine grains.And this product is of high toughness,
Good forgeability, and well anti corrosiveness, furthermore, this is a good choice for colormatch in welding after anodic process.
The model er4047 do not suggested to use in aluminum alloy workpiece which working temperature is over 65ºc,thus will cause corrosion cracking in welded
Joints.You should strictly clean the oxide film on the edge of the workpiece and oil before welding, otherwise it will make bad weld produce and cause porosity,
Slag inclusion and other defects.Also you can use a plate to hold molten metal to ensure meld form.
The argon arc welding of aluminum & magnesium alloy welding wires is used as the filler material, widely used in welding among al/mg/si, almasilalloy and
Aluminium & magnesium alloy, like:Bicycles, aluminum scoter, etc.Engine carriage, pressure vessel, armory processing, shipbuilding.Space shuttle etc.
|1065 - 1170°F|
|Anti corrosion performance||B(Gen) A(SCC)|
|The coefficient of thermal expansion (20 degree ~300 degree )||22×10-6/K|
|Thermal conductivity (20 degree)||170W/m@K|
D300 6-7kg/spool (0.8mm-1.6mm)
D270 5-6kg/spool (0.8mm-1.6mm)
D200 2kg/spool (0.8mm-1.2mm)
D100 0.5kg/spool (0.8mm-1.2mm)
1000mm length 5kg/box (1.6mm,2.0mm,2.4mm,3.0mm)
1000mm length 10kg/box (3.2mm,4.0mm,5.0mm,6.0mm)
Every spool product is strongly packed by carton box with antirust paper inside.
Container load:84spool/pallet , 22pallets/20ft (based on 6-7kg/spool)
Raw materials:Qingdao steel, bao steel, zhongtian stee
We ship the package by Fedex, DHL, UPS etc. Usually it takes 3-5 days to USA, 3-7 days to other countries.
For stock order, we can arrange shipment within 2 days upon receipt payment.
Customized order usually needs 7-10 days.