ER4047 is a type of aluminium alloys wires containing 12% silicon, low melting point, good liquidity, good corrosion resistance, the color is ash black after anodic process.
ER4047 aluminium & silicon is with high of crack resistance, but low plasticity, so for Plastic deformation joints after welding, we donor suggest it. You should strictly clean the oxide film on the edge of the workpiece and oil before welding. Otherwise it will make bad weld produce and cause porosity, slag inclusion and other defects. Also you can use a plate to hold molten metal to ensure meld form.
The argon arc welding of Al-Si, Al-Mg-Si, AI-Mg-Si-Cu Forging aluminium and aluminium(7%Si) is used as the filler material, And it has advantages of low melting point and good fluidity which avoids the distortion after welding. Widely used in pure aluminium, Al-Mn, Al-Si-Mg alloys melding.
|Melting range||1060 - 1175°F|
|Anti corrosion performance||A(Gen) A(SCC)|
|The coefficient of thermal expansion (20 Degree ~300Degree)||23.7×10-6/K|
|Thermal conductivity (20 Degree) ||110-150W/m@K|
The argon arc welding of Aluminum & Magnesium alloy welding wires is used as the filler material, widely used in welding among Al/Mg/Si, Almasilalloy and
Aluminium & Magnesium alloy, like: bicycles, aluminum scoter, etc. engine carriage, pressure vessel, armory processing, shipbuilding. space shuttle etc.
D300 6-7KG/Spool (0.8mm-1.6mm)
D270 5-6KG/Spool (0.8mm-1.6mm)
D200 2KG/Spool (0.8mm-1.2mm)
D100 0.5KG/Spool (0.8mm-1.2mm)
1000mm length 5KG/box (1.6mm,2.0mm,2.4mm,3.0mm)
1000mm length 10KG/box (3.2mm,4.0mm,5.0mm,6.0mm)
Every spool product is strongly packed by carton box with antirust paper inside.
Container load: 84spool/pallet , 22Pallets/20ft (Based on 6-7KG/spool)
Raw materials: Qingdao steel, Bao steel, Zhongtian stee
Dimensional tolerances: 0.01-0.02mm
Quality: Class A
Weight tolerances: 0.05kg/spool
spool materials: plastic